VFM60MV type MultiVariable Digital Vortex Mass Flowmeters is an integral solution of mass flow /standard flow measurement in steam, compressed air, gas, liquid, etc fluid system. Integrated pressure and temperature transmitter for density compensation, able to measure temperature, pressure, density, mass flow and standard flow directly.
The advantage at a glance
- Built-in temp & pressure compensation transmitter
- Patent dual probe design excellent anti-vibration performance
- Measurement limit down to 2m/s wide turndown ratio(for steam: 2~70m/s)
- Compact design integrated temperature & pressure transmitter support high range up to 350°C
- Saturated/super heated steam monitoring and custody transfer measurement
- Monitoring the compressed air inlet/outlet of compressor
- Steam boiler monitoring
- Gas drainage in coal mines
- Measurement Nature gas process control and custody transfer
- Measurement of conductive and non-conductive liquids
COMATE-Bluetooth software enables users remote access to COMATE Vortex flowmeters and Thermal Mass flowmeters by wireless Bluetooth connection. Users can read and adjust the flowmeter’s settings simply by accessing their cell phone, tablet or any Bluetooth enabled device
Vortex meters are the most reliable & accurate measurement innovation technology available & widely accepted across the industries.
Theory of vortex type flow meters according to “Karman vortex”(click here) working theory designed for gas flow, steam or liquid’s volume flow, standard volume flow or mass flow measurement.
VFM60MV Series Multivariable Vortex Flowmeters incorporate Comate start-of-art technologies. This type multi-variable vortex mass flow metermake highly accurate measurements of various fluids including liquid, gas, saturated steam, and superheated steam. Support high temperature up to 350°C(662°F) in particular.
By helps of three built-in sensor, a vortex shedding flow velocity, a pressure transmitter and a temperature sensor, VFM60MV can more accurately measure the mass/standard flow rate of medium though density compensation.
VFM60MV Multivariable Digital Vortex Type Flowmeters:
Extremely high sensitivity, minimum flow rate down to 2m/s with 1:35 super wide turndown ratio
Patent dual-sensor design and optimized signal processing technology to ensure best anti-vibration
No moving parts, very small pressure loss
One vortex flowmeters can measure mass flow, temperature, pressure and density
Standard output is pulse and 4~20 mA, Hart@4~20mA and RS485 is available
Password protecting function and self-diagnose function
VFM60MV high temperature(350°C/662°F) version
|Fliud to measure||Liquid, steam, gas|
|Steam||6~70 m/s||4~70 m/s||2~70 m/s|
|Gas||6~60 m/s||4~60 m/s||2~60 m/s|
|Accuracy||±1% RD (insertion is 1.5%RD)|
|For multi-variable version: temperature ±1°C,pressure:0.75% FS|
|Output||Pulse / 4~20mA / 4-20mA@ HART / RS-485|
|Process Temperature Range||-40℃~150℃ ; -40℃~250℃ ; -40℃~350℃ ;|
|Process Pressure Limit||–0.1 MPa (–1 kg/cm2) to flange rating|
|Ambient Temperature Range||–40 to 85°C|
|Ambient Humidity||5 to 100% RH|
|Electrical Connection||1/2 NPT, M20 × 1.5|
|Materials||304 SS, 316 SS, 316L SS|
The Nm3/hr unit of flow range, is the standard flow under 20dgr C and 0.1Mpa, vortex flow meter range should be base on actual velocity range, than transfer to standard flow or mass flow according to the pressure and temperature in the pipe.
|Mode codes||VFM60 series Digital Vortex Type Flowmeters|
|1||General model||VFM60-N||Standard vortex flowmeters (without integral RTD and pressure sensor)||Standard|
|VFM60-MV||Vortex mass flowmeter with integral RTD and pressure sensor||Option|
|2||Transmitter Location||T||Integral||Standard||Standard remote cable length is 5m, for longer cable, please let us know|
|3||Process connection||0||Insertion||Option||Insertion for DN200~1000, wafer and flanged type for pipes smaller than 300mm|
|4||Fluid type||1||Liquid||Standard||If the fluid is steam, please advise if it is saturated or superheated|
|5||Wetted part material||1||OCr18Ni9(304)||Standard||For other materials, please advise your requirement.|
|6||Pressure rating||3||1.6 Mpa||Standard|
|7||Medium Temperature||N||T≤150℃||Standard||If temperature is lower than 40 dgr C, please check with us.|
|S||T≤250℃(wafer or flanged)||Option|
|H||T≤350℃ (wafer or flanged)||Option|
|8||Transmitter||1||pulse/4~20mA||Standard||The HART signal is output though 4~20mA
MV stand for multi-variable version
Option 2,4,6,8,9 require one week more for production
|9||Blue tooth||Q||No Blue tooth||Standard||If need blue tooth, has to has RS485|
|B||With blue tooth||Option|
|Pipe size||xxx||xxx||This 3 digits code indicates the inner diameter of the pipe, for example, 050 means DN50,|
Vortex flow meter Work principle is to rearching the corresponding relationship between fluid vibration frequency and flow velocity. It measures the flow velocity of fluid by measuring the frequency of sensor output signal. That leaves many vortex meter manuafacturet faced the prolems of vibration, electromagnetic interference and the lower limit of measurement in the development and application of vortex type flowmeter.
Comate understood Vibration then build a new equipment to measure it. Early in 2015, Comate have cooperate with USTC signal processing laboratory and put an unique design method in order to detect the real change of electric charge completely generated by fluids. After that Comate put VFM60MV in factory like compressed air, boiler steam, heating system nad owned a good feedback. The interference solved also makes Comate vortex meter able to measure down to 2m/s velocity than other brand in the marketplace.
To view Comate Multivariable Digital Vortex Type Flowmeters anti-vibration contrast test