TGF450 Thermal Mass Flow Meter

TGF450 inline thermal mass flow meter is a measurement solution specially designed for compressed air and nitrogen flow. It can provide a stable and accurate measurement on a more economical cost. It has 1.5% FS+0.5RD accuracy on a 100:1 wide turndown ratio. The compact design and thick probe are easier to be installed on high pressure pipeline with limited room.

Advantages at a glance:

  • Minimum flow rate down to 0.3m/s, 1:100 super wide turndown ratio
  • Designed for  air and nitrogen flow measurements, especially for compressed air
  • Standard output is pulse and RS485, Hart@4~20mA and 4~20mA is available
Request A Quick Quote

Specially designed for air and nitrogen mass flow measurements
Low cost , economical model, ideal for mass installation.
Inline installing, can be installed/removed without stopping the line
Compact design, easy to insertion mounting under high pressure
Minimum flow rate down to 0.3m/s, 1:100 super wide turndown ratio
No moving part, almost no pressure loss
Direct mass flow measurement, do not require temperature or pressure compensation
Isolated design for electrical parts to eliminate interference
Optimized power efficiency design, supper low power consumption down to 60mA@24VDC
2 lines LCD display with unit displaying
Standard output is pulse and RS485, Hart@4~20mA and 4~20mA is available
Metric/British Unit selectable

Password protecting function and self-diagnose function with connected user’s phone via Bluetooth

TGF450 inline thermal mass flowmeter application compressed air monitoring & control system

TGF450- Insertion type In-line type
Media Compatibility Air, Nitrogen,O2,CO2,Argon,CH4, Natural gas, biogas, and almost all dry and clean air
Pipe diameter DN25~6000mm DN15~300mm
Flow velocity range 0.3~30Nm/s or 0.6~60Nm/s or 0.9~90Nm/s or 1.2~120Nm/s
Accuracy 0.5% RD+ ±1.5% FS
Temperature of medium -40~+150°c
Pressure of medium 1.6MPa 4.0Mpa
Power supply AC85~265V or DC13.5~42V
Response time 1 second
Output Frequency + pulse + 4~20Ma as standard
Communication RS~485 as standard , 4~20mA@HART as optional
Date displayed Mass flow, Volume flow in normal condition
Total flow , Temperature of medium. Velocity
Ingress protection grade IP65 (GB China)
Mode codes TGF450-
Model Basic Model TGF450- C 4 T 1 1 C B C 8 1
Process
Connection
Flanged in-line F
Insertion(NPT) C
Insertion(NPT)(wit anti-ejection design) D
Insertion(with flange) G
Probe
length
290mm,19mm dia (DN25~DN150) 1
440mm,19mm dia (DN25~DN500) 2
255mm,11mm dia(DN25~DN100) 3
320mm,11mm dia(DN25~DN250) 4
395mm,11mm dia(DN25~DN400) 5
Other Q
Transmitte Integral T
Remote R
Material OCr18Ni9(304) 1
316 2
Other Q
Pressure
Rating
1.6 Mpa 1
2.5 Mpa 2
4Mpa 3
6.3Mpa 4
Flange
Standard
For Chemical industry A
GB China B
ANSI C
Other Q
Max
Temperature
Standard (T≤150℃) N
Other Q
Enclosure Comate blue enclosure C
Transmitte pulse/frequency + 4~20mA@HART 7
pulse/frequency + 4~20mA + RS485 8
Power
supply
13.5~42VDC 1
85~265VAC 50/60Hz 2
Pipe size please use 3 digit pipe size, such as DN50=050, DN300=300 xxx
Remark:
1. Ball valve, Hop-tap insertion tool and hot-tap hole opener are as accessoires, please remark if you need any of them
2. Please indicate flow rate along with the model number selected
3. If you have any requirement that can not be fulfilled in this document, please check with us to see the availability
4. The model selected in 1st line is the standard configuration with no accessories